Powder Coating Line With Fast Color Change System And PVC Spray Booth
Introduction for standard Coating Booth:
Our standard coating booth is designed for ease of assembly and maintenance, with both inner and outer areas that are simple to clean. This ensures a tidy and efficient working environment.
Each side of the booth is equipped with:
- Two sets of automatic spray guns for consistent coating.
- Two sets of manual spray guns for detailed work.
- Compressed air connectors for easy setup of equipment.
Shielded sections are placed at the entrance and exit to prevent powder from escaping. Inside, six "three-prevention" light groups on the roof provide a minimum of 300 lux illumination, ensuring clear visibility.
For safety, an emergency stop button is located at the control station to halt operations if needed immediately.
We also offer customized coating booths for specific requirements, and users can build the outer room according to their own needs.
This booth combines ease of use, safety, and customization options to meet various coating needs.
The Coating booth can be customized according to client's desire. We can also customize the corresponding coating production line based on product characteristics.
The Process of Powder Coating Line:
| 1. Surface Preparation: | The first step in the powder coating line is the surface preparation of the aluminum profiles. This stage is essential to ensure proper adhesion of the powder coating. Surface preparation may include cleaning, degreasing, and removing any contaminants from the aluminum surfaces. |
| 2. Pre-Treatment: | After surface preparation, the aluminum profiles undergo a pre-treatment process to enhance coating adhesion and corrosion resistance. Common pre-treatment methods include chemical cleaning, phosphating, or chromate conversion coating. The pre-treatment prepares the aluminum surface for better powder adhesion and improves coating performance. |
| 3. Drying: | Once the pre-treatment is completed, the aluminum profiles are passed through drying ovens to remove any remaining moisture from the surface. Dry aluminum surfaces are crucial for proper powder coating adhesion and finish. |
| 4. Powder Coating Application: | The dried aluminum profiles are then ready for powder coating application. The powder coating material is electrostatically charged and sprayed onto the aluminum profiles using powder coating guns. The positively charged powder particles are attracted to the grounded aluminum profiles, adhering to the surface uniformly. |
| 5. Powder Curing: | After powder coating application, the aluminum profiles are transferred to curing ovens. In the curing ovens, the powder coating undergoes a thermal curing process. The oven's heat causes the powder particles to melt and flow, creating a continuous, smooth coating film. The curing process also chemically cross-links the powder particles, ensuring a durable and hardened finish. |
| 6. Cooling: | Following the curing process, the coated aluminum profiles are allowed to cool down. This cooling phase stabilizes the coating and ensures it maintains its properties and appearance. |
| 7. Quality Inspection: | After cooling, the coated aluminum profiles undergo a thorough quality inspection. The inspection involves checking the coating thickness, appearance, adhesion, and overall quality to ensure it meets the specified standards. |
